Mind Gear XCELR8R Program Command Description

The following commands and their allowed values are used in the
Mind Gear (TM) XCELR8R programs (.PRG files).  The files are
plain ascii, one command per line, with a comma in between the
command and its argument.  All commands MUST have an argument,
and no blank lines are permitted at the beginning or end of the
file.

Command    Range        Description

  DC       0-7          Duty Cycle: 0=20%, 1=30%, ... 7=90%

  FM       0-4,7        Frequency Multiplier:   0='1'    1='2'
                             2='2.'    3='3'    4='3.'   7='GANZ'

  TN       0-3          Tone:   0=Single, 1=White Noise,
                                2=Pink Noise, 3=Binaural

  TI       1-300        Time Delay in Seconds: Note - only the
                        following values are allowed:
                                1-16, 20 to 80 by 4's,
                                90 to 315 by 15's,
                                300 to 6000 by 60's.
                        Any other values used will be truncated
                        to the next lower value.

  FQ      -1 to 115     Set Frequency:  -1 -> 0.5 Hz,  0 -> 1 Hz,
                                1-40 -> 1.1 to 5.0 Hz by 0.1 Hz
                                41-65 -> 5.2 to 10 Hz by 0.2 Hz
                                Note that 54 is 7.83 Hz, not 7.8 Hz
                                66-105 -> 10.5 to 30 Hz by 0.5 Hz
                                106-115 -> 31 to 40 Hz by 1 Hz

  PV       0-35         Set Pitch: 0 to 35 correspond to the 36
                                pitch values available

  VO       0-100        Set Volume: corresponds to XCELR8R display

  IN       0-100        Set Intensity: corresponds to XCELR8R display

  PH       0-5          Set Phase: 0=Simultaneous, 1=Left/Right
                                2=Front/Back,      3=Opposite Sides,
                                4=Alternate Sound, 5=Alternate Light

  FF    -128 to 127     Fast Frequency Ramp
  FS    -128 to 127     Slow Frequency Ramp
  IF    -128 to 127     Fast Intensity Ramp
  IS    -128 to 127     Slow Intensity Ramp
  PF    -128 to 127     Fast Pitch Ramp
  PS    -128 to 127     Slow Pitch Ramp
  VF    -128 to 127     Fast Volume Ramp
  VS    -128 to 127     Slow Volume Ramp

  FE       0            Fade to End - MUST have argument of zero

  EN       0            End - MUST have argument of zero